42CrMo4 QT Mechanical Properties: How Are They Related?
📑 Table of Contents
- 🔍 What Are the Main Mechanical Properties of 42CrMo4 QT Steel?
- 📊 What Are the Typical Mechanical Property Values of 42CrMo4 QT?
- ⚙️ How Are Yield Strength and Tensile Strength Related?
- 🔨 How Are Hardness and Tensile Strength Related in 42CrMo4 QT?
- 🧪 How Do Elongation and Impact Toughness Affect Performance?
- 🔥 How Does Quenching and Tempering Change Mechanical Properties?
- 📏 How Does Section Thickness Affect 42CrMo4 QT Mechanical Properties?
- 📋 What Should Buyers Check in a 42CrMo4 QT Test Certificate?
- 🏢 How Can Buyers Source 42CrMo4 QT Steel with Reliable Quality?
- ❓ Frequently Asked Questions About 42CrMo4 QT Mechanical Properties
When buyers evaluate 42CrMo4 QT steel, they often focus on tensile strength or hardness first. However, neither value alone can describe the complete performance of this alloy steel. Yield strength, elongation, reduction of area and impact toughness also influence whether the material can meet the demands of a particular component.
42CrMo4, material number 1.7225, is a chromium-molybdenum alloy steel commonly supplied in the quenched and tempered condition. Manufacturers use it for shafts, gears, axles, machine components and other parts exposed to substantial mechanical loads. Its performance depends on both the steel’s composition and the heat-treatment process.
For procurement teams, understanding how these mechanical properties relate is especially important. A high tensile strength does not automatically mean excellent impact resistance, while a high hardness result does not prove that the entire section has achieved uniform mechanical properties. Buyers should evaluate the complete test data, product dimensions and delivery condition before approving an order.
🔍 What Are the Main Mechanical Properties of 42CrMo4 QT Steel?
Yield strength and tensile strength
Yield strength indicates the stress at which a material begins to deform permanently under a tensile load. Before reaching this point, the steel generally returns to its original dimensions after the load is removed, provided it remains within the elastic range.
Tensile strength, also called ultimate tensile strength, represents the maximum engineering stress reached during a tensile test. It describes the maximum tensile load per unit of the original cross-sectional area that the specimen withstands during the test.
These two properties help engineers evaluate whether a 42CrMo4 QT component can resist operating loads without excessive permanent deformation or tensile failure.
Elongation and reduction of area
Strength alone does not show how much deformation the steel can tolerate before fracture. Elongation measures the percentage increase in the gauge length after a tensile test. Reduction of area measures the decrease in the specimen’s cross-sectional area at the fracture location.
Both values provide information about ductility. A suitable combination of strength and ductility helps a component withstand manufacturing stresses and certain unexpected loading conditions without becoming excessively brittle.
Hardness and impact toughness
Hardness measures resistance to localized indentation. For 42CrMo4 QT, buyers commonly review Brinell hardness alongside tensile properties because hardness offers a practical way to assess the material’s surface response and heat-treatment consistency.
Impact toughness describes the energy absorbed by a specimen during a sudden impact test. Charpy V-notch impact energy is a common measurement. This property matters when components experience shock loading, vibration or low-temperature service conditions.
The main mechanical properties therefore describe different aspects of performance rather than interchangeable measures of quality.
| Property | What it measures | Why it matters |
|---|---|---|
| Yield strength | Resistance to permanent deformation | Controls allowable working stress |
| Tensile strength | Maximum tensile stress during testing | Indicates tensile load capacity |
| Elongation | Percentage extension before fracture | Indicates tensile ductility |
| Reduction of area | Decrease in cross-sectional area at fracture | Provides additional ductility information |
| Hardness | Resistance to indentation | Helps assess surface resistance and heat-treatment condition |
| Impact toughness | Energy absorbed during impact | Helps evaluate resistance to sudden loading |
📊 What Are the Typical Mechanical Property Values of 42CrMo4 QT?
Reference values under EN 10083-3
42CrMo4 QT mechanical properties depend on the product’s ruling section and the applicable product standard. The following table presents commonly published values for hot-formed or hot-rolled products in the quenched and tempered condition under EN 10083-3:2006. It is a useful reference for understanding how the specified properties change with section size.
| Diameter / thickness range (mm) | Tensile strength Rm (MPa) | Yield strength Rp0.2 (MPa min.) | Elongation A (%) | Hardness HB (reference) |
|---|---|---|---|---|
| Up to 16 / up to 8 | 1100–1300 | 900 | 10 min. | 331–380 |
| 16–40 / 8–20 | 1000–1200 | 750 | 11 min. | 298–359 |
| 40–100 / 20–60 | 900–1100 | 650 | 12 min. | 271–331 |
| 100–160 / 60–100 | 800–950 | 550 | 13 min. | 240–286 |
| 160–250 / 100–160 | 750–900 | 500 | 14 min. | 225–271 |
Important: The paired diameter and thickness ranges follow the reference table’s product-size format. The applicable size category, test direction and specimen requirements must be checked against the actual product standard and purchase specification. Hardness values are for information in this reference table, not a substitute for the specified tensile test.
Why one value cannot represent every 42CrMo4 QT product
Consider two buyers ordering 42CrMo4 QT for different applications. One needs a relatively small shaft, while the other needs a much thicker machine component. Although both products carry the same grade designation, their required mechanical property ranges may differ.
As section size increases, the material becomes more difficult to harden uniformly throughout its cross-section. Consequently, the standard’s minimum yield strength and tensile strength requirements may decrease for larger ruling sections.
Buyers should therefore avoid selecting a material based only on the highest strength value shown in a general datasheet. Instead, compare the required product dimensions with the correct size category and verify the actual test results on the MTC.
Check the standard edition before placing an order
EN 10083-3:2006 appears in many established 42CrMo4 QT datasheets. However, European quenched and tempered steel requirements have also been consolidated and updated under later standards, including EN ISO 683-2. Buyers should identify the edition specified in their drawings, contract or technical agreement.
Do not assume that a table copied from an older datasheet automatically satisfies a newer or different standard. Confirm the exact requirements before comparing supplier quotations.
⚙️ How Are Yield Strength and Tensile Strength Related?
Two different stages of tensile loading
Yield strength and tensile strength are both important indicators of a steel’s ability to withstand tensile loading. However, they describe different points in the tensile test.
When a specimen is pulled, it initially deforms elastically. If the load is removed during this stage, the specimen generally returns to its original length. Once the stress exceeds the yield point or the specified proof stress, permanent deformation begins.
As the test continues, the specimen can withstand additional engineering stress through plastic deformation and strain hardening. Eventually, it reaches its maximum engineering stress, which is the tensile strength. Necking and final fracture follow.
Understanding the yield-to-tensile relationship
The ratio between yield strength and tensile strength is often called the yield ratio:
Yield ratio = Yield strength / Tensile strength
For example, consider a hypothetical 42CrMo4 QT test result with a yield strength of 750 MPa and a tensile strength of 1000 MPa:
Yield ratio = 750 / 1000 = 0.75
This result means that the measured yield strength is 75% of the tensile strength. It does not mean that the material can safely operate at 75% of its tensile strength. Engineers must establish allowable stresses using the relevant design code, safety factors and loading conditions.
Why buyers should check both values
A supplier may advertise a high tensile strength, but the buyer still needs to know whether the yield strength meets the component’s design requirements. A material can withstand a high maximum tensile stress yet begin permanent deformation at a lower stress than the application allows.
For example, a shaft subjected to repeated torque or bending may require sufficient yield strength to limit permanent deformation during service. Tensile strength alone cannot confirm that requirement.
On the other hand, yield strength does not describe the complete fracture behavior. The tensile strength, elongation and impact properties also help engineers assess the material’s response under different loading conditions.
For procurement approval, compare the actual yield and tensile results with the correct standard limits for the product size. This provides a more reliable assessment than reviewing either value independently.
🔨 How Are Hardness and Tensile Strength Related in 42CrMo4 QT?
Why hardness often increases with tensile strength
In quenched and tempered steel, hardness and tensile strength often show a positive correlation. A harder structure generally offers greater resistance to plastic deformation, which often corresponds to higher tensile strength.
For this reason, steel producers and buyers frequently use hardness testing as a convenient way to monitor the consistency of heat-treated products. Brinell hardness is commonly reported for 42CrMo4 QT, although other hardness methods may be used when the product specification allows them.
Why hardness cannot replace tensile testing in every case
Although hardness and tensile strength are related, they are not identical properties. Hardness testing measures resistance to indentation at a relatively small location. A tensile test evaluates the behavior of a specimen under controlled tensile loading.
Published hardness-to-tensile conversion charts provide estimates, but the relationship depends on the steel type, microstructure and test conditions. A conversion should not automatically replace a tensile test when the standard or purchase agreement requires certified tensile results.
There is another important consideration: a surface hardness result does not necessarily prove that a thick section has achieved uniform hardness through its entire cross-section.
How buyers should interpret hardness results
When reviewing a 42CrMo4 QT MTC, buyers should check the hardness scale, measured value and testing location. If the certificate reports HBW, compare it with the specified Brinell requirement rather than directly comparing it with an HRC result without an appropriate conversion method.
Also, distinguish between a hardness range specified for information and a contractual acceptance limit. Some reference tables list hardness alongside tensile properties but explicitly identify hardness as an informative value.
For critical applications, the buyer should define whether tensile testing, hardness testing or both are mandatory. This avoids disputes when a supplier’s hardness result appears acceptable but the tensile properties have not been verified.
🧪 How Do Elongation and Impact Toughness Affect Performance?
Elongation indicates tensile ductility
Elongation measures how much a tensile specimen extends before fracture. A higher elongation generally indicates greater tensile ductility under the specified test conditions.
For 42CrMo4 QT, elongation must be considered alongside strength. Increasing strength through heat treatment can reduce ductility if the process does not maintain an appropriate balance. Therefore, engineers should not select a material solely because it achieves the highest possible tensile strength.
Elongation also depends on the specimen geometry and gauge length. When comparing test certificates, buyers should check whether the reported value uses the required gauge length, such as A5, rather than assuming that all elongation percentages are directly comparable.
Reduction of area provides additional information
Reduction of area measures how much the specimen’s cross-section decreases at the fracture location during a tensile test. It provides another indication of local plastic deformation and ductility.
A material may show acceptable elongation but still require verification of reduction of area if the relevant standard specifies it. For example, some commonly published EN 10083-3 reference tables include minimum reduction-of-area values in addition to elongation.
Impact toughness matters under sudden loading
Impact toughness describes the energy absorbed by a specimen during a sudden fracture event. Charpy V-notch testing is widely used to evaluate this behavior. The test result is usually reported in joules.
This property is particularly relevant for components exposed to shock, vibration or fluctuating operating loads. A shaft or gear that experiences sudden loading may need an appropriate combination of strength and impact resistance rather than maximum hardness alone.
Temperature and test direction matter
Impact energy depends on test temperature and specimen orientation. A Charpy result measured at room temperature should not automatically be used to predict performance at a much lower service temperature.
Likewise, longitudinal and transverse specimens can produce different results, especially in products with directional characteristics from rolling or forging. Buyers should confirm the test temperature, specimen direction and notch orientation where the project requires impact testing.
For applications with demanding impact requirements, include the minimum impact energy and test temperature in the purchase specification. This makes the acceptance criteria clear before production and inspection begin.
🔥 How Does Quenching and Tempering Change Mechanical Properties?
Quenching increases strength and hardness
Quenching and tempering are the main heat-treatment processes used to obtain the required mechanical properties of 42CrMo4 QT steel.
During quenching, the steel is heated to a suitable austenitizing temperature and then cooled at a controlled rate. This process forms a hardened microstructure, commonly martensitic or a mixture depending on the section size and cooling conditions.
The quenched structure offers high hardness and strength, but it may also contain substantial internal stresses and have insufficient toughness for the intended application. Therefore, quenching alone is not normally the final condition for components requiring a balanced combination of properties.
Tempering adjusts the strength-toughness balance
Tempering involves reheating the quenched steel to a selected temperature below the transformation range and holding it for a controlled period. This process reduces brittleness and internal stresses while adjusting hardness and strength.
In general, a higher tempering temperature tends to reduce hardness and strength while improving toughness and ductility. However, the final results depend on the complete heat-treatment cycle, including the initial quenching conditions, holding time, cooling method and component dimensions.
Why heat-treatment control matters
Two batches of 42CrMo4 with similar chemical compositions may produce different mechanical test results if their heat-treatment processes differ. The temperature uniformity, quenching medium, cooling rate and tempering conditions all influence the final microstructure.
Section thickness is especially important. A large component may cool more slowly at its center than at its surface. As a result, the center may not achieve the same hardened condition as the outer region.
For buyers, this means the QT designation alone does not guarantee that every size will achieve identical mechanical properties. The required properties must be checked against the product dimensions and the agreed delivery specification.
Do not confuse QT and annealed conditions
42CrMo4 can also be supplied in an annealed condition for machining or further processing. Annealed material is not automatically equivalent to quenched and tempered material.
For example, a buyer who needs a finished shaft with specified yield strength and tensile strength should not accept an annealed product simply because its chemical composition matches 42CrMo4. The delivery condition and mechanical test requirements must match the order.
Before purchasing, state whether the required material is +QT, annealed or another agreed condition. This simple confirmation helps prevent problems during machining, heat treatment and final inspection.
📏 How Does Section Thickness Affect 42CrMo4 QT Mechanical Properties?
Understanding hardenability and through-section properties
Section thickness is one of the most important factors when evaluating 42CrMo4 QT mechanical properties. Hardenability describes the steel’s ability to develop a hardened structure to a certain depth during quenching. It is not the same as maximum hardness.
When a steel component undergoes quenching, its surface generally cools faster than its center. As the section becomes thicker, the temperature difference between the surface and core can become more significant.
This difference can produce variations in microstructure, hardness and mechanical properties across the section. Consequently, a thick bar may not achieve the same center properties as a much smaller bar under the same heat-treatment conditions.
Why standard property requirements decrease with size
Many 42CrMo4 QT property tables specify different minimum strength values for different product-size ranges. Smaller sections can generally achieve higher strength requirements because their cross-sections are easier to harden more uniformly.
For larger sections, the specified minimum yield and tensile strengths may be lower. This does not necessarily indicate poor material quality. Instead, it reflects the practical influence of hardenability and heat-treatment conditions on larger products.
Check the ruling section, not only the finished dimension
Buyers should pay particular attention to the concept of ruling section. It refers to the relevant section size used to determine the applicable mechanical property requirements under the standard.
For a bar, the ruling section is generally associated with its diameter or thickness when heat treated. A component that is machined down after heat treatment does not automatically qualify for the smaller-size property category.
For example, if a 75 mm bar is quenched and tempered before being machined to a smaller finished diameter, the original heat-treatment section remains important when determining which property requirements apply. Buyers should not select a higher-strength table row simply because the final machined part is smaller.
What buyers should confirm for large sections
When purchasing thick 42CrMo4 QT plate, bar or forged material, ask the supplier to confirm the applicable section-size category and the mechanical testing location. If the project requires properties at the center or through the full section, specify this requirement before ordering.
Also confirm whether the standard’s test requirements apply to the supplied product form. A hot-rolled bar, forged component and plate may follow different product specifications or testing arrangements.
These checks help engineering and procurement teams avoid applying small-section mechanical values to large components that cannot meet the same requirements.
📋 What Should Buyers Check in a 42CrMo4 QT Test Certificate?
Verify the grade and material identification
Start by checking the material designation, material number and applicable standard. For 42CrMo4, the commonly used material number is 1.7225. However, the designation alone does not establish that the product meets every requirement in the buyer’s specification.
Check the heat number, batch identification and product dimensions. These details connect the test results to the actual material being delivered and support traceability during receiving inspection.
Review the chemical composition
The MTC should provide the actual chemical analysis for the supplied heat when required by the purchase specification. Buyers should compare the reported carbon, silicon, manganese, chromium, molybdenum and other specified elements with the applicable standard limits.
Do not rely on a generic chemical composition table as proof of the supplied batch’s chemistry. A typical analysis is useful for understanding the grade, but the actual MTC results are the relevant batch-specific information.
Compare all required mechanical test results
Review yield strength, tensile strength, elongation, reduction of area, hardness and impact energy where applicable. Confirm that the results satisfy the correct product-size category and delivery condition.
Also check the specimen direction, test temperature and testing standard. These details can affect the interpretation of the results, especially for impact testing and large-section products.
Use a practical purchasing checklist
| Item to verify | Buyer question |
|---|---|
| Grade and standard | Does the certificate identify 42CrMo4 / 1.7225 and the agreed standard edition? |
| Delivery condition | Is the material supplied in the specified quenched and tempered condition? |
| Product dimensions | Does the applicable property range match the actual ruling section? |
| Tensile test | Do yield strength, tensile strength and elongation meet the requirements? |
| Hardness | Is the hardness scale and acceptance range clearly identified? |
| Impact test | Are the test temperature, specimen direction and required energy stated? |
| Traceability | Can the test results be linked to the delivered batch and heat number? |
| Inspection | Are additional ultrasonic or third-party inspection requirements included where necessary? |
Make special requirements clear before ordering
If the application requires a particular impact energy, center hardness, tensile property or additional inspection, include it in the inquiry and purchase order. Do not assume that a standard certificate automatically covers requirements beyond the agreed product specification.
Clear documentation requirements help suppliers prepare the correct material and arrange appropriate inspection before shipment. They also reduce the risk of disagreement when the buyer receives the material and checks the certificate.
🏢 How Can Buyers Source 42CrMo4 QT Steel with Reliable Quality?
Match the stock size to the engineering requirement
Choosing the correct grade is only the first step. Buyers should also confirm the available product dimensions, delivery condition, machining allowance and final component requirements.
OTAI Special Steel supplies 42CrMo4 alloy steel plate in a confirmed thickness range of 4–380 mm. Buyers should confirm the exact available dimensions, quantity and delivery condition for each order. In particular, the confirmed plate stock range should not be interpreted as a guarantee that every thickness is already supplied in the QT condition.
When requesting a quotation, provide the required thickness, width, length, quantity and any special mechanical property requirements. This allows the supplier to check whether the available material and processing arrangements match the project.
Consider cutting and machining services
OTAI operates more than 20 saw-cutting machines and offers CNC machining and grinding services. These capabilities support customers who need customized dimensions, cutting tolerances or further material preparation.
For heavy industrial components, accurate cutting and suitable machining allowances can help reduce unnecessary processing at the customer’s facility. Buyers should provide finished dimensions and drawings when they need a closer assessment of processing requirements.
Confirm inspection and traceability arrangements
Reliable material sourcing also depends on documentation and inspection. OTAI supports material quality checks, ultrasonic testing arrangements and third-party inspection according to customer requirements.
Before placing an order, specify the required MTC, inspection scope, traceability details and acceptance criteria. If the component has demanding mechanical requirements, agree on the test method and specimen location before production or material allocation.
Evaluate supply experience and export support
OTAI has more than 10,000 tons of stock and has exported steel to over 54 countries since 1999. The company provides one-stop support covering material supply, cutting, machining, inspection coordination and export packaging.
Packaging can include anti-rust protection, strapping and wooden cases according to the order and transportation requirements. Buyers should also confirm the delivery schedule, shipping terms and documentation needed for import clearance.
Ultimately, a reliable 42CrMo4 QT purchase requires more than a competitive price. The buyer should confirm the grade, delivery condition, product dimensions, mechanical properties and inspection requirements as one complete specification. This approach helps ensure that the supplied material is suitable for the intended manufacturing process and final application.
❓ Frequently Asked Questions About 42CrMo4 QT Mechanical Properties
1. What is the tensile strength of 42CrMo4 QT steel?
It depends on the product size and applicable standard. Under commonly published EN 10083-3:2006 reference tables, tensile strength ranges from approximately 1100–1300 MPa for the smallest size category to 750–900 MPa for the largest category shown. Buyers should check the correct size range and actual MTC results.
2. What is the yield strength of 42CrMo4 QT?
The minimum yield strength depends on the ruling section. Common EN 10083-3:2006 reference values range from 900 MPa for smaller sections to 500 MPa for the 160–250 mm diameter or 100–160 mm thickness category. The applicable standard and product form must be confirmed before using these values.
3. What is the hardness of 42CrMo4 QT?
Commonly published reference tables show Brinell hardness ranges that decrease as the product section becomes larger. For example, a small section may have a reference range of 331–380 HB, while a 160–250 mm diameter category may show 225–271 HB. Always check whether the stated hardness is an informative value or a contractual acceptance requirement.
4. Does 42CrMo4 QT strength decrease as thickness increases?
Specified minimum strength requirements generally decrease as the ruling section increases. Larger sections are more difficult to harden uniformly through the cross-section, so the standard may specify lower minimum mechanical values. The correct size category must be used when reviewing the certificate.
5. Is 42CrMo4 QT the same as 42CrMo4 annealed steel?
No. Both conditions use the same steel grade, but their heat-treatment states and mechanical properties differ. Quenched and tempered material is processed to achieve a balance of strength and toughness, while annealed material is generally softer and easier to machine. Buyers must specify the required delivery condition clearly.











