16MnCr5 alloy steel, Otai provides a specific size for you.
Today let’s talk about 16MnCr5 alloy steel, it is geared steel, we will receive several quotes from our clients every year. Although it is not the main product of our company, I’d like to share the basic information with you. If you are considering to buy it, maybe you can know more about the 16MnCr5 alloy steel from this article.
16MnCr5 gear steel is a steel grade imported from Germany, which is equivalent to China’s 15CrMn steel, but its mechanical properties are better than 15CrMn steel. It has better hardenability and machinability. For larger cross-section parts, a higher surface can be obtained after heat treatment.
16MnCr5 is a carburized steel, which is usually low carbon steel with a carbon content of 0.17% to 0.24%. Most of the transmission gears used in automobiles are medium-hardenability carburizing steels, which have high hardenability. Under the condition of ensuring hardening, especially with high low-temperature impact toughness. 16MnCrS is suitable for surface carburizing and hardening treatment. , Has good processability, processing distortion is small, fatigue resistance is quite good.
Chemical of 16MnCr5 alloy steel:
C: 0.14~0.19%
Si: 0.15~0.40%
Mn: 1.00~ 1.30%
Cr: 0.80~1.10%
S:≤0.035%
P:≤0.035%
Form of Supply
DIN 16MnCr5|1.7131 gearing steel, otai company can supply the round bar, steel flat bar, plate, hexagonal steel bar, and steel square block. DIN 16MnCr5|1.7131 steel Round bar can be sawn to your required lengths as one-offs or multiple cut pieces. 16MnCr5|1.7131 gearing steel Rectangular pieces can be sawn from flat bar or plate to your specific sizes. Ground tool steel bar can be supplied, provide a quality precision finished bar to tight tolerances.
Application of 16MnCr5 alloy steel
16MnCr5 is good carburizing steel with high hardenability. After carburizing and quenching, it has a hard and wear-resistant surface and a tough heart. It has high low-temperature impact toughness, medium weldability, and can be cut after normalizing. Sex is good.
16MnCr5 is used to manufacture important parts with a cross-section <30mm, which can withstand high speed, medium or heavy load, impact, and friction, such as gears, ring gears, gear shaft crossheads, etc. Can be used as 15CrNi6 substitute steel, widely used as carburizing parts, in the automobile, aircraft and tractor industry for cross-section below 30mm, withstand high speed, medium speed or heavy load and impact, friction important carburizing parts, such as gears, Shafts, ring gears, gear shafts, main shafts of sliding bearings, crossheads, claw clutches, worms, etc.
