T10 Steel Stock in China

T10 Steel Stock in China from Otai Special Steel .

What is T10 Steel ? T10 carbon tool steel has higher strength and abrasion resistance than T8 and T9, but has low thermal rigidity, low hardenability and large quenching deformation, and fine grains. It is not easy to overheat during quenching and heating, and can still maintain fine grains. Microstructure; there are undissolved excess carbides in the steel after quenching, so it has high wear resistance, Otai Special Steel have stock with T10 and is used to make tools with sharp edges and a little toughness. It is suitable for manufacturing various tools with poor cutting conditions, high wear resistance, and resistance to sudden and severe shock vibration, which requires certain toughness and sharp edges, and can also be used as wear-resistant parts that are not subject to large impacts .

T10 Steel Stock in China from Otai Special Steel .

With regards to t10 steel, the T, in this case, signifies that it’s a High-Speed steel with a Tungsten Base. High-Speed tool steels include tungsten (t1 to t15) and the molybdenum (M1 to M52) steel alloys. These allow are characterized by their ability to be hardened to 62 to 67 HRC. while maintaining this hardness through significant temperature ranges, up to 1004°F, which means they are particularly well suited to high-speed machinery (hence the name). These steel alloys are commonly employed in drills, lathes, routers, and saws. The 10 in T10 signifies the carbon content, which ranges between 0.95% and 1.05%. The T types of steel start at T1` which is between 0.05% and 0.15% carbon content, all the way up to T15 which typically has a carbon content of between 1.2% and 1.3%.

T10 Steel Stock in China from Otai Special Steel .
T10 steel is perhaps one of the strongest and most suitable carbon steels that we are easily able to obtain for knife tool use. Its characteristics and properties are not only suitable for tools, but it can create a superb knife tool as well.