DIN X155CrVMo12 Tool Steel china supplier and stockholders. It has good wear resistance and size ability after heat treatment. Otai special steel are suppliers of X155CrVMo12 Tool steel in round bar, plate, sheet and block which can be saw cutting to your requirements.
Related Specifications A681-1999 | DIN G4404(2000) | GB /T1299 X155CRVMO12 DATA PDF QOWN
Chemical composition of X155CrVMo12 steel
| C(％) | 1.40～1.60 | Si(％) | ≤0.40 | Mn(％) | ≤0.60 |
| P(％) | ≤0.030 | S(％) | ≤0.030 | Cr(％) | 11.0～13.0 |
| Mo(％) | 0.80～1.20 | V(％) | 0.20～0.50 | Ni(％) | <0.50 |
Equivalent Of DIN X155CrVMo12 cold work alloy tool steel
| USA | Germany | China | Japan | France | England | Italy | Poland | Czechia | Austria | Sweden | Spain |
| ASTM/AISI/UNS/SAE | DIN,WNr | GB | JIS | AFNOR | BS | UNI | PN | CSN | ONORM | SS | UNE |
| D2 / T30402 | X155CrVMo12-1/ 1.2379 | Cr12MoV | SKD11 | X160CrMoV12/ Z160CDV12 | BD2 | X155CRVMO121KU | |||||
Form of Supply
X155CRVMO12 tool steel, we can supply the round bar, flat bar, plate and square block. Diameters can be sawn to your required lengths as one offs or multiple cut pieces. Rectangular pieces can be sawn from flat bar or plate to your specific sizes. Ground tool steel bar can be supplied, providing a quality precision finished bar to tight tolerances.
-
- Round
-
- Square
-
- sheet
-
- Plate
Applications
X155CRVMO12 Tool Steel is used in the making of knife-edge mold, scissors, circular saw blades, metal stamping mold. Used to make cold work or hot work dressing dies, sides of rollers, screw lines, lines dies, transformer core stamping dies, rolled knives, steel tube forming rollers, special molding rollers, screw heading molds, etc. Also used for blanking dies, stamping dies and pressing dies with a thickness ≤ 6mm. It can also be found in the production of various kinds of scissors, inlaid blades and thread rolling dies. It is also used to make wear-resistant slider cold heading dies, deep drawing molding dies, cold extrusion dies and in the making of thermosetting resin molding dies and common plastic dies.
Regular size and Tolerance
Hot rolled STD 11 steel Round bar: Ø2mm~150mm
Hot Forging X155CRVMO12 Steel Round bar:Ø5mm~3000mm
Hot rolled Steel plate X155CRVMO12 Material: Thickness 5mm to 210mm x Width 210-1250mm
Forged Steel plate SKD11 material: Thickness 130mm to 810mm x Width 210-1250mm
Others have not specified size, pls contact our experienced sales team.
Physical properties of X155CRVMO12 Tool Steel
- Density of X155CRVMO12 Cold work Alloy Tool Steel: 7.85KG/CM3
- Forged Ratio: 5:1 Min
- Melting point: 1427 °C
- Mechanical properties of X155CRVMO12 Tool Steel
- Tensile strength: 1200 – 1590 MPa
- Tensile strength, yield: 1000-1380 MPa
- Poisson’s ratio: 0.27-0.30
Processing for X155CRVMO12 steel
X155CRVMO12 tool steel round bar and flat sections can be cut to your required sizes. X155CRVMO12 ground steel bar can also be supplied, providing a high quality tool steel precision ground tool steel bar to your required tolerances. X155CRVMO12 tool steel is also available as Ground Flat Stock / Gauge Plate, in standard and nonstandard sizes.
Contact our experienced sales team to help you with your X155CRVMO12 tool steel questions by email or telphone. The questions will be reply in 24 hours.
OTAI SPECIAL STEEL CO., LTD
Email: jack@otaisteel.com TEL: 0086-769-33232622 FAX: 0086-769-88705839
